How to Troubleshoot the Auto CAD Integrator Configuration

In some cases, after installing the Auto CAD Integrator software, Auto CAD is not properly configured for Auto CAD Integrator to run. If the IBM TRIRIGA CAD Integrator menu does not display when you start Auto CAD, use the following procedures to configure the search path, load the IBM TRIRIGA CAD Integrator menu, and optionally display the Auto CAD Integrator toolbars.

How do I configure the Auto CAD Search Path?

Use the following procedure to configure the Auto CAD search path.

To Configure the Auto CAD Search Path

Step 1.  From the AutoCAD Menu Browser, click Options.

Step 2.  In the Files tab, expand Support File Search Path.

Step 3.  If the install path to CAD Integrator (e.g., C:\Program Files\IBM Tririga\ci) is not listed, click Add.

Step 4. Type the full path to the CAD Integrator installation, or click Browse to locate and select the path.

Step 5. Click OK to save the information and close the dialog box.

How do I load the IBM TRIRIGA CAD Integrator menu?

Use the following procedure to load the IBM TRIRIGA CAD Integrator menu.

To Load the IBM TRIRIGA CAD Integrator menu

Step 1.  Enter the menuload command.

Step 2.  To locate and select the file name of the menu, click Browse.

Step 3.  Browse to the installation directory of your CAD Integrator software (e.g.,

C:\Program Files\IBM Tririga\ci) and select the TriAcad.cuix file.

Step 4. Click Open.

Step 5. Click Load.

Step 6. Click Close to exit the Load/Unload Customizations dialog box.

The CAD Integrator is now properly configured and the menu is displayed in the AutoCAD menu list.

Step 7. Return to AutoCAD and review the IBM TRIRIGA CAD Integrator menu in the AutoCAD menu list.

If the Menu Bar is not displayed, go to the Quick Access toolbar and choose the Show Menu Bar option.